Activity

  • McGuire Godfrey posted an update 11 months, 4 weeks ago

    A decorative molding is a any continuous projection that is utilized to improve the design of a wall. In ancient Greece, these folks were first employed to throw water out of the wall. The contours, measurements, and projections of moldings vary greatly.

    Frieze

    One sort of molding – the frieze (or frieze board) – was used on the Parthenon in the Acropolis. The frieze is known as an element of the Greek architectural style.

    The Parthenon was produced for the goddess Athena. The frieze moldings that have been used were meant to tell the storyline of her triumph over Poseidon in succeeding as the patron from the ancient city that is now Athens.

    The frieze panels are a group of designed pediments which are filled with the photographs of Athena’s birth and rise to power. Today, a frieze board is the flat panel just beneath a crown molding or cornice. Often, low relief is used to the panel for added decoration.

    Today, frieze moldings are most frequent as being a percentage of an ornamental molding that follows the neoclassical architecture or decorating style.

    You need a pretty high ceiling (a minimum of 9 feet), and it is a good idea to stain or paint the frieze and also the crown molding the same color. The frieze is an excellent strategy to visually bring the ceiling down to make the room appear cozier.

    Crown Molding

    Crown molding is among the most popular kind of cornice molding. Crown molding is commonly a single-piece of decorative molding, installed on top of a wall, at an angle to the adjoining ceiling. However, I know of crown molding assemblies of 5 or higher pieces in many elaborate settings.

    Crown molding often carries a profile that projects on the ceiling and down the wall, adding a wealthy appearance into a room. It is used towards the top of cabinets or built-in furniture.

    Introducing such a decorative molding to a not at all hard room offers a historic character the room wouldn’t normally otherwise have. Crown molding can also be used in combination with other moldings to include details to fireplace mantels and shelves. (For the purpose it’s worth, this is my favorite architectural feature).

    Crown molding is really a kind of Cornice Molding. The word "cornice" describes molding installed across the top of a wall or above from the. Once this therapy is made from multiple pieces of molding, method . a "build-up cornice." The opposite way of cornice molding is the Cove Molding.

    Cove Molding

    Cove molding is very just like crown molding, with the same application and performance. The gap backward and forward influences profile. Cove molding carries a concave profile (which bows inward) while crown molding carries a convex (outward) profile.

    While crown is most in your own home in traditional settings, Cove moldings are equally comfortable in country, and even contemporary settings. You do not normally see multi-piece assemblies of cove moldings. It is possible to occasionally view it "beaded" at upper and lower for a little accent.

    Entries, formal rooms, formal dining rooms, and master bedrooms usually receive decorative moldings with ornate or traditional patterns.

    Kitchens along with other more functional aspects of the house could be in places you will discover the greater style of the cove molding. Through the years, coves and crowns have grown to be smaller, but a majority of still bear the styles and shapes with the original Greek and Roman designers.

    Chair Rail Molding

    A chair rail can be a decorative molding that divides a wall horizontally, usually about 32" to 36" higher than the floor. They protect the walls in locations where damage might occur from people arising away from chairs.

    Because of this, greater traditional chair rails have a nosing inside the center, with curved and beveled surfaces that taper to the wall above and underneath the nosing.

    Today, chair rails remain a typical detail in traditional interiors. They serve the decorating aftereffect of unifying the different architectural specifics of an area, like window and door trim, and fireplace surrounds.

    Chair rail may also be used as a cap for wainscoting or another wood paneling. This decorative molding adds a sense detail and charm while achieving continuity within a room by unifying the many decorative elements.

    Panel Molding

    Panel molding, commonly referred to as a picture frame molding, seems like a big empty frame, and is often portion of designs on walls of old Colonial and, Georgian, and Early American homes. The position of this molding ought to be higher than the chair rail height contributing to 10 to 12 inches below the ceiling.

    How big is this sort of decorative molding, measuring 1" to 3" wide, ought to be proportionate to the ceiling height with the room. Just like the other moldings, panel molding adds feeling of charm and delicate detail into a room.

    Wall framing appears at the Georgian period of American architecture, when plaster did start to replace wood panels for the walls. Panel molding also is a fantastic way to divide walls into large, aesthetically pleasing units, devoid of the same expense of full wall paneling.

    Another application of this versatile molding is always to trim openings made by wider planks that happen to be assembled as rails and designs. Often, the centers of the frames are left open. By utilizing panel moldings across the perimeter from the opening, you create the feel of images frame.

    After this decorative molding is painted inside the same color because the surrounding walls, you achieve a sculptural quality to a wall, adding texture and shadows. If moldings are painted in contrasting colors, they are able to produce a striking 3 dimensional appearance, giving depth and dimension. This sort of treatment is popular for staircases and entries.

    Baseboard & Base Molding

    Baseboard molding protects the base of the wall from ware and tear, while hiding openings along with other irregularities the location where the wall meets a floor. Base moldings supply the floor line an increased profile, and is as elaborate or simple as you like.

    Whereas it really is relatively simple to install chair rail over a level plane, baseboard (like crown) may be tricky if the floors (or ceilings) aren’t level. Because of this, I propose finding a professional woodworker for your installation of these moldings.

    As one remedy to uneven floors, it is possible to install a "shoe molding" over the bottom front edge to own baseboard a finished look. Something different that can be done with baseboard (along with with all the toe kick of your respective kitchen cupboards) is incorporate accent lighting.

    This is simply not consistent with the pure traditionalist, but it’s a fairly nifty strategy to have accent lighting throughout the perimeter of an room. You could not try this until they made the small LED rope lights nowadays.

    Rope lights come in different lengths and colours, and could be easily installed behind baseboard. Simply make a notch inside the back side from the baseboard, towards the top, and run the rope lights in the notch.

    This is often used in commercial spaces, but has been included entries and hallways – specially in contemporary homes.

    Flexible Moldings

    When you have a curved wall or arch, it is possible to probably have an excellent craftsman produce a curved molding for around Thrice the price tag on an upright molding. Or, you can purchase a flexible molding for approximately a similar price because straight one.

    These enable you to install moldings onto curved surfaces or arches, with no delay and tariff of getting them made out of wood. The stock profiles (you can find hundreds) are the same towards the rigid versions and they are compatible as much as paint finish is concerned.

    More info about moulding.vn please visit site:
    check it out.

%d bloggers like this: